Bearings Bushings- Lower Control Arm (Wishbone) Eccentric Monoballs Front (Pair) 996,997,991 1999-2015

Our Eccentric Control Arm Monoball Cartridges replace inner rubber bushings with spherical bearings, providing low friction and precisely holding camber settings. The eccentric design allows increasing or decreasing camber, as needed.

Made from hardened steel, plated and weather-sealed, this bearings are made to last. Fits easily into the front and rear stock and GT3 type control arms of 1999-2012 996 and 997 cars.

Increasing camber - Position the eccentric to maximize Lower Wishbone length, adding about .86 degree of negative camber on the rear suspension, .39 degrees on the front suspension. Cost effective for cars that just want extra camber.

Shown with factory wishbone, not included

Decreasing camber - Position the eccentric to minimize Lower Wishbone length. Perfect for lowered cars that have too much negative camber and want to get back to factory camber settings to minimize tire wear on the street.  Makes rear camber about .86 degrees more positive, front camber about .39 degrees more positive